Interconnecting Cisco Networking Devices Part1
- Our CCNA courses use the latest hardware giving delegates dedicated Cisco Routers & Switches to configure and maintain
- Exam Pass Guarantee: Book on any of our Cisco CCNA courses and we guarantee that you will pass your CCNA exam See Below FAQs
- All Cisco courses include exclusive CCNA exam preparation guidance, course materials and pre & post course support
- CCNA training courses delivered by world class Cisco instructors in luxury venues to enable you to gain your CCNA recognised certification
- Book Online or Call 02036038880 to speak to a Cisco Training advisor
|Interconnecting Cisco Networking Devices Part1||30/11/2020||Home Virtual||4 days||Book OnlineEnquire|
|Interconnecting Cisco Networking Devices Part1||07/12/2020||Home Virtual||4 days||Book OnlineEnquire|
|Interconnecting Cisco Networking Devices Part1||14/12/2020||Home Virtual||4 days||Book OnlineEnquire|
|Interconnecting Cisco Networking Devices Part1||21/12/2020||Home Virtual||4 days||Book OnlineEnquire|
|Interconnecting Cisco Networking Devices Part1||28/12/2020||Home Virtual||4 days||Book OnlineEnquire|
What is your Pass Guarantee?
Our exam pass guarantee gives you confidence that we will support your learning until you pass your Cisco exam. We guarantee that you will pass your Cisco exam after completing our Cisco Class. All we require is for you to take the exam within 30 days of completing the class. Attend all class days and complete all class assignments and all Cisco practice exams. If you do not pass the exam after the 1st attempt, we will allow you to attend the class again free of charge. Should you fail the exam on your 2nd attempt, you will be eligible to enrol in the class again, free of charge. Cisco examination results must be verified to confirm re-enrolment and is subject to availability.
Who should attend this course?
Network administrators, Network engineers, Network managers, Systems engineers
What are the pre-requisites?
No prior knowledge of networking is required for this course, though you should have some familiarity with using a PC
What is included in the course?
Included in your Cisco course is: the courseware Book, exclusive Cisco exam preperation guidance, Cisco course materials, actual hardware, pre and post course support via email & phone, experienced classroom based instructor, refreshments and certificate
What exam shall I take with this course?
You will be required to take exam 640-822 ICND1. This will have to be arranged directly with Pearson Vue via http://www.pearsonvue.com/cisco/ or 0800-7319905
Do you offer support for the course?
We are able to provide support via phone & email prior to attending, during and after the course
Is the course classroom based?
Yes. Our Cisco courses are classroom based instructor led
What are the course hours?
The typical training day is between 09:00am to 17:00pm. However, this may vary slightly in accordance with the requirements of the course and our delegates
What time shall I arrive at the course?
Please arrive at the venue for 08:45am for a prompt 09:00am start
Interconnecting Cisco Networking Devices Part 1 (ICND1)
The knowledge and skills that a learner must have before attending this course are as follows:
Basic computer literacy
Basic Microsoft Windows navigation skills
Basic Internet usage skills
Basic e-mail usage skills
Interconnecting Cisco Networking Devices Part 1 focuses on providing the skills and knowledge necessary to implement and support a small switched and routed network. For the purpose of this course, a small network is defined as 1 to 20 hosts connected to a single switch, with the switch running a single VLAN (VLAN1). The switch is also connected to a router providing a routed link (Routing Information Protocol [RIP] and default) to a simulated Internet and corporate office. ICND1 works from the bottom up, providing knowledge and skills as they are needed. The course starts with an introduction to networks. It then introduces host-to-host communications using TCP / IP. Next, Layer 2 devices (switches) are introduced into the network. Next, Layer 3 devices (routers) are introduced into the network. The introduction of Layer 3 devices leads to the use of WANs and routing to connect the site to the Internet and corporate sites.
Upon completing this course, the learner will be able to meet these overall objectives:
Describe how networks function, identifying major components, function of network components, and the OSI reference model
Using the host-to-host packet delivery process, describe issues related to increasing traffic on an Ethernet LAN and identify switched LAN technology solutions to Ethernet networking issues
Describe the reasons for extending the reach of a LAN and the methods that can be used, with a focus on RF wireless access
Describe the reasons for connecting networks with routers and how routed networks transmit data through networks using TCP / IP
Describe the function of WANs, the major devices of WANs, and configure PPP encapsulation, static and dynamic routing, PAT, and RIP routing
Use the command-line interface to discover neighbors on the network and manage the router start up and configuration
Module 1: Building a Simple Network
Module 2: Ethernet LANs
Module 3: WLANs
Module 4: LAN Connections
Module 5: WAN Connections
Module 6: Network Environment Management Capstone Lab: Network Environment Management Lab Guide
Who Should Attend
- The courseware Book
- Exclusive Cisco exam preperation guidance
- Cisco course materials
- Actual hardware
- Pre and Post course support via email & phone
- Experienced classroom based instructor
There hasn't been any testimonials submitted to this course
We do not currently have a video for this course
Special Bundle Offers
Choose a learning package and
start learning today!
1 Bell Street, Maidenhead, Berkshire, SL6 1BU